Some of my command buttons in some of my forms don't consistently fire on the first click attempt.  Is this a Sesame issue, a Windows issue, or a 'Larry writing sluggish code' issue?

btw, I use 'just in time' compilation.

ah!  That makes perfect sense.  Yes, I do have subforms.  I'll investigate that today.

Although I will mention that in my SOLines, I used to be able to tab onto a command button from another field in that same form, and then press the space bar to push the button.  But now it requires me to click the button with the mouse (on the first time.  After that I can use the space bar to press the button).   I know I changed something to cause that, but can't fathom what.

Moving between forms almost always results in two clicks, first one for focus, the next one for the action.  This has been an irritation from the very first beta version of Sesame.  After a while, you just learn to accept it. 

I think the only way to perform this in one click is to put a button on the form that currently has the focus.  That button would then be programmed to go to the other form, set the focus and perform the desired action.  You could make the target button action into a SubRoutine so that you could use it on multiple buttons.  But that whole process is just an involved workaround, and you would need to do that for every anticipated action on the sub form.

yes, I did upgrade to ver 2.5.

I'm glad to know it's not just my 'stumbling code' that's the culprit.

I've worked around it by creating a 'writeln' message when going from Parent to Child.  When the user clicks 'x' to erase the writeln message, that transfers focus to the child subform, so that the first click then 'takes'.

parent PONum:nElementExit

If (@Mode() = 1)
  {
     SubformVisibility("POLines", 1)
     vPYN = @FormFieldValue("POLines", "POLinesYN", 0)
     If vPYN <> "Y"
       {
           writeln("close this window and")
           Writeln("click on the POLines function you wish to begin")
           FormThrowFocus("POLines", "Launchpad")
       }

     
  }

fwiw,

when I removed this code section from POLines:nFormEntry, then I got rid of the stutter, and the first click on a command button in POLines 'takes'.

The three fields are all unbound number fields ....

     If (vPODate = @Date) and (vPOPlaced0 = "")

     {


// next section is for QtyAvail and QtyOnOrder

           vItemNum = @FormFieldValue("", "ItemNum", 0)
           vRS1 = @XResultSetSearch(@FN, "Inventory", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum)
           vTot = @XResultSetTotal(vRS1)

           vQtyAvail = @XResultSetValue(vRS1, "QtyAvail")
           vQtyOnOrder = @XResultSetValue(vRS1, "QtyOnOrder")
               FormFieldValue("", "QtyAvail", 0, vQtyAvail)
           FormFieldValue("", "QtyOnOrder", 0, vQtyOnOrder)
           XResultSetClose(vRS1)



// next section is for QtyOnBuild


           vItemNum = @FormFieldValue("", "ItemNum", 0)
           vPODate = @FormFieldValue("", "PODate", 0)
           //vPOYN = @FormFieldValue("", "POLinesYN", 0)
           //vDate = "PODate"


           vRS1 = @XResultSetSearch(@FN, "Purch!POLines", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum, "!PODate=" + @Date)
           vTot2 = @XResultSetTotal(vRS1)

           vDate = @XResultSetValue(vRS1, "PODate")
           vPOYN = @XResultSetValue(vRS1, "POLinesYN")
           vItemQty = @XResultSetValue(vRS1, "ItemQty")
                                                       
                       For vLoop = 1 to vTot2
                                       
                             XResultSetCurrentPosition(vRS1, vLoop)
                             vPOYN = @XResultSetValue(vRS1, "POLinesYN")
                             
                             If vPOYN <> ""
                               {
                                          XResultSetRemoveRecord(vRS1)
                                vLoop = vLoop - 1
                                vTot2 = vTot2 - 1                                
                                         }
                               Next

                       vLoop = 1                        
                       For vLoop = 1 to vTot2

                             XResultSetCurrentPosition(vRS1, vLoop)
                             vP = @XResultSetCurrentPosition(vRS1)

                             vItemQty = @XResultSetValue(vRS1, "ItemQty")

                             vQtyOnBuildTotal += @TN(vItemQty)

                       Next

           FormFieldValue("", "QtyOnBuild", 0, vQtyOnBuildTotal)
           XResultSetClose(vRS1)
               
         }

Hi Hammer,

I commented out the XResultSet code in my OnFormEntry programming, and substituted
vPrac = @FormFieldValue("", "ItemQty", 0)
FormFieldValue("", "QtyOnBuild", 0, vPrac)

so that I was still executing a FormFieldValue.   The programming worked great, with no stutter or 2nd click required.   

It seems from my testing that the XResultSet programming, OnFormEntry anyway, is the cause of the stutter or loss of focus, so that the first click of the command button is required to regain focus, and then the second click of that button actually executes the programming.

I would mention, too, that when the XResultSet programming is in place, when I click the command button the first time, the status bar on Sesame runs through its quick 'search' scroll, but the guts of the code doesn't 'take'

Hammer,

I tested the programming 3 different times, with the following program iterations.  I made 3 different shapshots of my POLines:nFormEntry programming, and present it below.  Snapshot 1 works (meaning that the command button PlaceLineItems executes all of its code on the first click;   with FormFieldValue plugging value in QtyOnBuild field, and with XResultSet commands commented out).  Snapshots 2 and 3 do not work (meaning that the programming in 2 and 3 - with XResultSet code active - causes the command button PlaceLineItems to not execute all of its code upon clicking it, requiring a second click).

When I say that the programming 'didn't work when XResultSet was active', I mean that the XResultSet code did do what it was supposed to do, but an unwanted byproduct seems to be that it is then causing a followup command button to require 2 clicks instead of 1 click.

This would seem to eliminate FormFieldValue as the focus pothole, and seems to indicate XResultSet as the cause of the stutter (at least in this specific instance), wouldn't it?  Certainly not trying to argue, just trying to understand.

Snapshot 1 (worked):
var vItemNum as string
var vRS1 as int

var vQtyAvail as string
var vQtyOnOrder as string
var vItemQty as int
var vTot as int
var vDate as date
var vQtyOnBuildTotal as int
var vLoop as int
var vTot2 as int
var vPOYN as string
var vPOYN2 as string
var vPODate as date
var vP as int

var vPrac as int


vPODate = @FormFieldValue("POLines", "PODate", 0)
vPOYN2 = @FormFieldValue("POLines", "POLinesYN", 0)


If (@Mode() = 0)
     {
                 
           Visibility(POLinesInvoiced, 0)
           Visibility(NextRecord2, 0)
           Visibility(QtyRecd0, 0)
           Visibility(QtyStillDue, 0)
           Visibility(TotalRecd, 0)
           Visibility(DateRecd, 0)
               Visibility(PrintLabels,0)
           Visibility(NextRecord,0)
           Visibility(NextRecord0,0)
           Visibility(NextRecord20,0)
           ReadOnly(POLinesYN, 2)
           ReadOnly(ItemAvail, 2)
           Visibility(AddNewItem,1)
           Visibility(PlaceLineItems, 1)
           Visibility(ReceiveItems, 1)
           Visibility(Invoiced?, 1)
               Visibility(Record, 1)
               Visibility(Records, 1)
               Visibility(Saved, 1)
           Visibility(PrevPO, 1)
           Visibility(PrevDate, 1)
           Visibility(ClearAll, 1)
           Visibility(QtyAvail, 1)
           Visibility(QtyOnOrder, 1)
           Visibility(QtyOnBuild, 1)
               Record = @FormResultSetCurrentPosition("POLines")
             Records = @FormResultSettotal("POLines")
               If @TN(Record) > @TN(Records)
                 {
                     Records = Record
                 }
                 
     }

If (@mode() = 1)

     {
           Visibility(PrevPO, 1)
           Visibility(QtyAvail, 1)
           Visibility(QtyOnOrder, 1)
           Visibility(QtyOnBuild, 1)
                                       
           If @Visibility(QtyRecd0) = 0
                 {
                       Visibility(NextRecord, 0)
                       Visibility(NextRecord0, 0)
                               Visibility(PrintLabels, 0)
                 } else
                       {
                             Visibility(NextRecord, 1)
                             Visibility(NextRecord0, 1)
                                              Visibility(PrintLabels, 1)
                       }
                       
           If @Visibility(POLinesInvoiced) = 0
                 {
                       Visibility(NextRecord2, 0)
                       Visibility(NextRecord20, 0)
                 } else
                       {
                         Visibility(NextRecord2, 1)
                         Visibility(NextRecord20, 1)
                       }

           If @Visibility(POLinesYN) = 0
                 {
                       Visibility(NextRecord1, 1)
                       Visibility(NextRecord10, 1)
                 } else
                       {
                         Visibility(NextRecord1, 1)
                         Visibility(NextRecord10, 1)
                       }


           If @FormAttribute("Purch", "PurchSave", ATTR_ID_VISIBILITY) = 1
                       {
                               Visibility(AddNewLineItem, 1)
                       
                 }
           
           If @FormAttribute("Purch", "PurchPlaced", ATTR_ID_VISIBILITY) = 1
                 {
                             ReadOnly(POLInesYN, 0)
                       Visibility(AddNewLineItem, 0)
                       ReadOnly(ItemAvail, 0)
                   }
                    Else
                       {
                         ReadOnly(POLinesYN, 1)
                         ReadOnly(PI, 1)
                       }

           If @FormAttribute("Purch", "PurchClosed", ATTR_ID_VISIBILITY) = 1
                 {
                             ReadOnly(POLinesInvoiced, 0)
                       
                 }
                    Else
                       {
                         ReadOnly(POLinesInvoiced, 1)
                         
                       }
                 
           If @FormAttribute("Purch", "PurchReceived", ATTR_ID_VISIBILITY) = 1
                   {
                             ReadOnly(QtyRecd0, 0)
                       
                 }
                    Else
                       {
                         ReadOnly(QtyRecd0, 1)
                         
                       }

     }
                                               
                       
     //  The below code is seems to be what causes the stutter.  If it's left out, no stutter, if the first section A is activated, no stutter.  
     //  If section A is commented out, and Section B is activated, then there is a stutter when PlaceLineItems command button is pressed.


If (@Mode() = 1) and (vPODate = @Date) and (vPOYN2 = "")
 {

       // the below Section A's two lines works without a stutter

vPrac = @FormFieldValue("", "ItemQty", 0)
FormFieldValue("", "QtyOnBuild", 0, vPrac)
 }


/*
           //  the below Section B seems to cause stutter when activated

           // next section is for QtyAvail and QtyOnOrder

     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vRS1 = @XResultSetSearch(@FN, "Inventory", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum)
     vTot = @XResultSetTotal(vRS1)

     vQtyAvail = @XResultSetValue(vRS1, "QtyAvail")
     vQtyOnOrder = @XResultSetValue(vRS1, "QtyOnOrder")
       FormFieldValue("", "QtyAvail", 0, vQtyAvail)
     FormFieldValue("", "QtyOnOrder", 0, vQtyOnOrder)
     XResultSetClose(vRS1)


           // next section is for QtyOnBuild


     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vPODate = @FormFieldValue("", "PODate", 0)
     //vPOYN = @FormFieldValue("", "POLinesYN", 0)
     //vDate = "PODate"

     vRS1 = @XResultSetSearch(@FN, "Purch!POLines", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum, "!PODate=" + @Date)
     vTot2 = @XResultSetTotal(vRS1)

     vDate = @XResultSetValue(vRS1, "PODate")
     vPOYN = @XResultSetValue(vRS1, "POLinesYN")
     vItemQty = @XResultSetValue(vRS1, "ItemQty")
                                                       
     For vLoop = 1 to vTot2
                                       
           XResultSetCurrentPosition(vRS1, vLoop)
           vPOYN = @XResultSetValue(vRS1, "POLinesYN")
                             
           If vPOYN <> ""
             {
                     XResultSetRemoveRecord(vRS1)
                 vLoop = vLoop - 1
                 vTot2 = vTot2 - 1                                
                 }
       Next

           vLoop = 1                        
           For vLoop = 1 to vTot2

                 XResultSetCurrentPosition(vRS1, vLoop)
                 vP = @XResultSetCurrentPosition(vRS1)

                 vItemQty = @XResultSetValue(vRS1, "ItemQty")

                 vQtyOnBuildTotal += @TN(vItemQty)

           Next

           FormFieldValue("", "QtyOnBuild", 0, vQtyOnBuildTotal)
           XResultSetClose(vRS1)


 }
*/

Snapshot 2 (first section of XResultSet active .. didn't work) ... I only pasted the last section of the programming that I altered for the test:

     //  The below code is seems to be what causes the stutter.  If it's left out, no stutter, if the first section A is activated, no stutter.  
     //  If section A is commented out, and Section B is activated, then there is a stutter when PlaceLineItems command button is pressed.


If (@Mode() = 1) and (vPODate = @Date) and (vPOYN2 = "")
 {

       // the below Section A's two lines works without a stutter

//vPrac = @FormFieldValue("", "ItemQty", 0)
//FormFieldValue("", "QtyOnBuild", 0, vPrac)
//}



           //  the below Section B seems to cause stutter when activated

           // next section is for QtyAvail and QtyOnOrder

     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vRS1 = @XResultSetSearch(@FN, "Inventory", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum)
     vTot = @XResultSetTotal(vRS1)

     vQtyAvail = @XResultSetValue(vRS1, "QtyAvail")
     vQtyOnOrder = @XResultSetValue(vRS1, "QtyOnOrder")
       FormFieldValue("", "QtyAvail", 0, vQtyAvail)
     FormFieldValue("", "QtyOnOrder", 0, vQtyOnOrder)
     XResultSetClose(vRS1)

/*
           // next section is for QtyOnBuild


     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vPODate = @FormFieldValue("", "PODate", 0)
     //vPOYN = @FormFieldValue("", "POLinesYN", 0)
     //vDate = "PODate"

     vRS1 = @XResultSetSearch(@FN, "Purch!POLines", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum, "!PODate=" + @Date)
     vTot2 = @XResultSetTotal(vRS1)

     vDate = @XResultSetValue(vRS1, "PODate")
     vPOYN = @XResultSetValue(vRS1, "POLinesYN")
     vItemQty = @XResultSetValue(vRS1, "ItemQty")
                                                       
     For vLoop = 1 to vTot2
                                       
           XResultSetCurrentPosition(vRS1, vLoop)
           vPOYN = @XResultSetValue(vRS1, "POLinesYN")
                             
           If vPOYN <> ""
             {
                     XResultSetRemoveRecord(vRS1)
                 vLoop = vLoop - 1
                 vTot2 = vTot2 - 1                                
                 }
       Next

           vLoop = 1                        
           For vLoop = 1 to vTot2

                 XResultSetCurrentPosition(vRS1, vLoop)
                 vP = @XResultSetCurrentPosition(vRS1)

                 vItemQty = @XResultSetValue(vRS1, "ItemQty")

                 vQtyOnBuildTotal += @TN(vItemQty)

           Next

           FormFieldValue("", "QtyOnBuild", 0, vQtyOnBuildTotal)
           XResultSetClose(vRS1)
*/

 }

Snapshot 3 ((second section of XResultSet active .. didn't work) ... I only pasted the last section of the programming that I altered for the test:

     //  The below code is seems to be what causes the stutter.  If it's left out, no stutter, if the first section A is activated, no stutter.  
     //  If section A is commented out, and Section B is activated, then there is a stutter when PlaceLineItems command button is pressed.


If (@Mode() = 1) and (vPODate = @Date) and (vPOYN2 = "")
 {

       // the below Section A's two lines works without a stutter

//vPrac = @FormFieldValue("", "ItemQty", 0)
//FormFieldValue("", "QtyOnBuild", 0, vPrac)
//}


/*
           //  the below Section B seems to cause stutter when activated

           // next section is for QtyAvail and QtyOnOrder

     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vRS1 = @XResultSetSearch(@FN, "Inventory", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum)
     vTot = @XResultSetTotal(vRS1)

     vQtyAvail = @XResultSetValue(vRS1, "QtyAvail")
     vQtyOnOrder = @XResultSetValue(vRS1, "QtyOnOrder")
       FormFieldValue("", "QtyAvail", 0, vQtyAvail)
     FormFieldValue("", "QtyOnOrder", 0, vQtyOnOrder)
     XResultSetClose(vRS1)
*/

           // next section is for QtyOnBuild


     vItemNum = @FormFieldValue("", "ItemNum", 0)
     vPODate = @FormFieldValue("", "PODate", 0)
     //vPOYN = @FormFieldValue("", "POLinesYN", 0)
     //vDate = "PODate"

     vRS1 = @XResultSetSearch(@FN, "Purch!POLines", SEARCH_MODE_AND,SEARCH_SYNTAX_QA, "!ItemNum=" + vItemNum, "!PODate=" + @Date)
     vTot2 = @XResultSetTotal(vRS1)

     vDate = @XResultSetValue(vRS1, "PODate")
     vPOYN = @XResultSetValue(vRS1, "POLinesYN")
     vItemQty = @XResultSetValue(vRS1, "ItemQty")
                                                       
     For vLoop = 1 to vTot2
                                       
           XResultSetCurrentPosition(vRS1, vLoop)
           vPOYN = @XResultSetValue(vRS1, "POLinesYN")
                             
           If vPOYN <> ""
             {
                     XResultSetRemoveRecord(vRS1)
                 vLoop = vLoop - 1
                 vTot2 = vTot2 - 1                                
                 }
       Next

           vLoop = 1                        
           For vLoop = 1 to vTot2

                 XResultSetCurrentPosition(vRS1, vLoop)
                 vP = @XResultSetCurrentPosition(vRS1)

                 vItemQty = @XResultSetValue(vRS1, "ItemQty")

                 vQtyOnBuildTotal += @TN(vItemQty)

           Next

           FormFieldValue("", "QtyOnBuild", 0, vQtyOnBuildTotal)
           XResultSetClose(vRS1)


 }

I will test per your instructions.  (update:  tested - same results.  no stutter with Snapshot 1 FormFieldValue code (also no stutter with all three snapshots commented out.   Snapshot 2 produces the stutter.   The stutter doesn't happen until the user proceeds to click into the subform on the PlaceLineItems command button for the first time.   Could somehow the code from this button not like the XResultSet code in the OnFormEntry ?   I will post that code if you want to see it.)  

I only have the two @FormFieldValue and FormFieldValue lines in there to test this stutter (or to eliminate @FormFieldValue and FormFieldValue by themselves as causing the stutter).

The stutter only happens on the first entry to the POLines subform and only happens when this XResultSet code is active (I use XResultSet throughout my programming - I love it, thank you, thank you, thank you).   And I also comment that the stutter only happens if clicking for the first time into the subform with the mouse.  If 'tabbing' into the subform from the parent form, then the stutter does not happen.    

The intent of the XResultSet code in this instance is:   a built-but-not-yet-called-in Purchase Order might be retrieved and added to throughout the day, as sales orders are generated.  Upon form entry of each PO line record, XResult is finding the real time Quantity Avail (on the shelf, not spoken for), QuantityOnOrder (items previously ordered on a PO but not received yet), and QuantityOnBuild (items placed on current PO's that have not been placed with the vendor yet) - info to help the PO placer make final judgments about quantity sizes.